Course Outcomes
Course Title : MATHEMATICS-I
Course code: MA101BS
Program: F Y BTech ( Sem -I)
- 1. Able to Write the matrix representation of a set of linear equations and to analyse the solution of the system of equations.
- 2. Able to Find the Eigen values and Eigen vectors.
- 3. Able to Reduce the quadratic form to canonical form using orthogonal transformations
- 4. Able to Analyse the nature of sequence and series.
- 5. Able to Solve the applications on the mean value theorems.
- 6. Able to Evaluate the improper integrals using Beta and Gamma functions.
- 7. Able to Find the extreme values of functions of two variables with/ without constraints.
Course Title : ENGINEERING PHYSICS
Course code: PH102BS
Program: F Y BTech ( Sem -I)
- 1. Get the knowledge of Physics relevant to engineering is critical for converting ideas into technology.
- 2. Get the knowledge of Physics also helps engineers understand the working and limitations of existing devices and techniques, which eventually leads to new innovations and improvements.
- 3. Get the knowledge of the mechanism of physical bodies upon the action of forces on them, the generation, transmission and the detection of the waves, Optical Phenomena like Interference, diffraction, the principles of lasers and Fibre Optics.
- 4. Get the knowledge of the different kinds of characters of several materials and pave a way for them to use in at various technical and engineering applications.
Course Title : PROGRAMMING FOR PROBLEM SOLVING
Course code: CS103ES
Program: F Y BTech ( Sem -I)
- 1. Able to write algorithms and to draw flowcharts for solving problems.
- 2. Students will learn to convert the algorithms/flowcharts to C programs.
- 3. Students will learn to code and test a given logic in C programming language.
- 4. Students will learn to decompose a problem into functions and to develop modular reusable code.
- 5. Students will learn to use arrays, pointers, strings and structures to write C programs.
- 5. Students will learn searching and sorting problems.
Course Title : ENGINEERING GRAPHICS
Course code: ME104ES
Program: F Y BTech ( Sem -I)
- 1. Ability to prepare working drawings to communicate the ideas and information.
- 2. Ability to read, understand and interpret engineering drawings.
Course Title : ENGINEERING PHYSICS LAB
Course code: EP105BS
Program: F Y BTech ( Sem -I)
- 1. Student can able to determine the frequency of a vibrating bar or turning fork using Melde’s arrangement.
- 2. Student can able to determine the rigidity modulus of the material of the given wire using torsional pendulum.
- 3. Student can able to determine the radius of curvature of the lens by forming Newton’s rings.
- 4. Student can able to determine the number of lines per inch of the grating.
- 5. Student can able to determine the dispersive power of prism by using spectrometer.
- 6. Student can able to determine the spring constant by single coupled oscillator.
- 7. Student can able to determine quality factor and resonant frequency of LCR circuit.
- 8. Student can able to study the characteristics of LASER sources.
- 9. Student can able to determine the bending losses of Optical fibres.
- 10. Student can able to determine the Numerical aperture of a given fibre.
Course Title : PROGRAMMING FOR PROBLEM SOLVING LAB
Course code: CS106ES
Program: F Y BTech ( Sem -I)
- 1. Student can able to formulate the algorithms for simple problems
- 2. Student can able to translate given algorithms to a working and correct program
- 3. Student can able to correct syntax errors as reported by the compilers
- 4. Student can able to identify and correct logical errors encountered during execution
- 5. Student can able to represent and manipulate data with arrays, strings and structures
- 6. Student can able to use pointers of different types
- 7. Student can able to create, read and write to and from simple text and binary files
- 8. Student can able to modularize the code with functions so that they can be reused
Course Title : MATHEMATICS - II
Course code: MA201BS
Program: F Y BTech ( Sem -II)
- 1. Student will be able to Identify whether the given differential equation of first order is exact or not.
- 2. Student will be able to Solve higher differential equation and apply the concept of differential equation to real world problems.
- 3. Student will be able to Evaluate the multiple integrals and apply the concept to find areas, volumes, centre of mass and Gravity for cubes, sphere and rectangular parallelopiped.
- 4. Student will be able to Evaluate the line, surface and volume integrals and converting them from one to another.
Course Title : CHEMISTRY
Course code: CH202BS
Program: F Y BTech ( Sem -II)
- 1. Student will gain the knowledge of atomic, molecular and electronic changes, band theory related to conductivity.
- 2. Student will gain the required principles and concepts of electrochemistry, corrosion and in understanding the problem of water and its treatments.
- 3. Student will gain the required skills to get clear concepts on basic spectroscopy and application to medical and other fields.
- 4. Student will gain the knowledge of configurational and conformational analysis of molecules and reaction mechanisms.
Course Title : ENGINEERING MECHANICS
Course code: ME203ES
Program: F Y BTech ( Sem -II)
- 1. Able to Determine resultant of forces acting on a body and analyse equilibrium of a body subjected to a system of forces.
- 2. Able to Solve problem of bodies subjected to friction.
- 3. Able to Find the location of centroid and calculate moment of inertia of a given section.
- 4. Able to Understand the kinetics and kinematics of a body undergoing rectilinear, curvilinear, rotatory motion and rigid body motion.
- 2. Able to Solve problems using work energy equations for translation, fixed axis rotation and plane motion and solve problems of vibration.
Course Title : ENGINEERING WORKSHOP
Course code: ME205ES
Program: F Y BTech ( Sem -II)
- 1. Able to Study and practice on machine tools and their operations.
- 2. Able to Practice on manufacturing of components using workshop trades including pluming, fitting, carpentry, foundry, house wiring and welding.
- 3. Able to Identify and apply suitable tools for different trades of Engineering processes including drilling, material removing, measuring, chiseling.
- 4. Able to Identify and apply suitable tools for different trades of Engineering processes including drilling, material removing, measuring, chiseling.
Course Title : ENGLISH
Course code: EN205HS
Program: F Y BTech ( Sem -II)
- 1. Able to Use English Language effectively in spoken and written forms.
- 2. Able to Comprehend the given texts and respond appropriately.span>
- 3. Communicate confidently in various contexts and different cultures.
- 4. Acquire basic proficiency in English including reading and listening comprehension, writing and speaking skills.
Course Title : ENGINEERING CHEMISTRY LAB
Course code: CH206BS
Program: F Y BTech ( Sem -II)
- 1. Student gain skills on Determination of parameters like hardness and chloride content in water.
- 2. Student gain skills on Estimation of rate constant of a reaction from concentration – time relationships.
- 3. Student gain skills on Determination of physical properties like adsorption and viscosity.
- 4. Student gain skills on Calculation of Rf values of some organic molecules by TLC technique.
Course Title : ENGLISH LANGUAGE AND COMMUNICATION SKILLS LAB
Course code: EN207HS
Program: F Y BTech ( Sem -II)
- 1. Students are able to attain Better understanding of nuances of English language through audio- visual experience and group activities
- 2. Students are able to attain Neutralization of accent for intelligibility
- 3. Students are able to attain Speaking skills with clarity and confidence which in turn enhances their employability skills
Course Title : MATHEMATICS - IV
Course code: MA301BS
Program: S Y BTech ( Sem -I)
- 1. analyze the complex functions with reference to their analyticity, integration using Cauchy’s integral theorem
- 2. find the Taylor’s and Laurent’s series expansion of complex functions
- 3. the bilinear transformation
- 4. express any periodic function in term of sines and cosines
- 5. express a non-periodic function as integral representation
- 6. analyze one dimensional wave and heat equation
Course Title : STRENGTH OF MATERIALS - I
Course code: CE302ES
Program: S Y BTech ( Sem -I)
- 1. Student will be able to Analyze the statically determinate and indeterminate problems.
- 2. Student will be able to determine the stresse and strains in the members subjected to axial, bending.
- 3. Student will be able to evaluate the slope and deflection of beams subjected to loads.
- 4. Student will be able to Determine the principal stresses and strains in structural members.
Course Title : FLUID MECHANICS - I
Course code: CE303ES
Program: S Y BTech ( Sem -I)
- 1. Student will be able to Apply conservation laws to derive governing equations of fluid flows.
- 2. Student will be able to Compute hydrostatic and hydrodynamic forces.
- 3. Student will be able to Analyze and design simple pipe systems.
- 4. Student will be able to Apply principles of dimensional analysis to design experiments.
- 5. Student will be able to Compute drag and lift coefficients
Course Title : BUILDING MATERIALS, CONSTRUCTION AND PLANNING
Course code: CE304ES
Program: S Y BTech ( Sem -I)
- 1. student will be able to identify various building materials required for construction & planning.
Course Title : SURVEYING
Course code: CE305ES
Program: S Y BTech ( Sem -I)
- 1. Ability to Calculate angles, distances and levels
- 2. Ability to Identify data collection methods and prepare field notes
- 3. Ability to Understand the working principles of survey instrument
- 4. Ability to Estimate measurement errors and apply corrections
- 5. Ability to Interpret survey data and compute areas and volumes
Course Title : STRENGTH OF MATERIALS LAB
Course code: CE306ES
Program: S Y BTech ( Sem -I)
- 1. Able to Conduct tension test on Materials like steel etc.
- 2. Able to Conduct compression tests on spring, wood and concrete.
- 3. Able to Conduct flexural and torsion test to determine elastic constants.
- 4. Able to Determine hardness of metals
Course Title : COMPUTER AIDED DRAFTING LAB
Course code: CE307ES
Program: S Y BTech ( Sem -I)
- 1. Master the usage of Autocad commands for drawing 2D & 3D building drawings required for different civil engineering applications.
Course Title : SURVEYING LAB – I
Course code: CE308ES
Program: S Y BTech ( Sem -I)
- 1. Practically able to draw plans & maps to determine the areas before taking up any civil engineering works.
Course Title : GENDER SENSITIZATION LAB
Course code: MC300HS
Program: S Y BTech ( Sem -I)
- 1. Students will have developed a better understanding of important issues related to gender in contemporary India.
- 2. Students will be sensitized to basic dimensions of the biological, sociological, psychological and legal aspects of gender. This will be achieved through discussion of materials derived from research, facts, everyday life, literature and film.
- 3. Students will attain a finer grasp of how gender discrimination works in our society and how to counter it.
- 4. Students will acquire insight into the gendered division of labour and its relation to politics and economics.
- 5. Men and women students and professionals will be better equipped to work and live together as equals.
- 6. Students will develop a sense of appreciation of women in all walks of life.
- 7. Through providing accounts of studies and movements as well as the new laws that provide protection and relief to women, the textbook will empower students to understand and respond to gender violence.
Course Title : STRENGTH OF MATERIALS – II
Course code: CE401ES
Program: S Y BTech ( Sem -II)
- 1. Able to determine stresses in the members subjected to torsion.
- 2. Able to analyze columns and struts.
- 3. Able to understand the concept of direct and bending stresses.
- 4. Able to analyze and design springs, thin and thick cylinders.
- 5. Able to understand the concept of unsymmetrical bending.
Course Title : FLUID MECHANICS - II
Course code: CE402ES
Program: S Y BTech ( Sem -II)
- 1.Able to Understand the concepts o channel flows.
- 2.Able to Compute flow profiles in channel transitions and analyze hydraulic transients.
- 3.Able to Design the working proportions of hydraulic machines.
Course Title : STRUCTURAL ANALYSIS
Course code: CE403ES
Program: S Y BTech ( Sem -II)
- 1. Able to Analyze perfect, imperfect and redundant frames..
- 2. Ability to Formulate equilibrium and compatibility equations for structural members.
- 3. Ability to Analyze one dimensional and two dimensional problems using classical methods.
- 4. Ability to Analyze indeterminate structures.
- 5. Ability to Analyze structures for gravity loads, moving loads and lateral loads.
Course Title : ENGINEERING GEOLOGY
Course code: CV404ES
Program: S Y BTech ( Sem -II)
- 1. Able to Understand weathering process and mass movement.
- 2. Ability to Distinguish geological formations.
- 3. Ability to identify geological structures and processes for rock mass quality.
- 4. Ability to Identify subsurface information and groundwater potential sites through geophysical investigations.
- 5. Able to Apply geological principles for mitigation of natural hazards and select sites for dams and tunnels.
Course Title : BUSINESS ECONOMICS AND FINANCIAL ANALYSIS
Course code: SM405MS
Program: S Y BTech ( Sem -II)
- 1. Student will understand the various forms of Business and the impact of economics variables on the Business.
- 2. Student will understand The Demand, Supply, Production, Cost, Market Structure, Pricing aspects are learnt..
- 3. Student will understand The Students can study the firm’s financial position by analyzing the Financial Statements of a Company.
Course Title : FLUID MECHANICS LAB
Course code: CE406ES
Program: S Y BTech ( Sem -II)
- 1. Able to Determine coefficient of discharge for orifice and mouthpiece.
- 2. Able to Calibrate notches venturimeter orifice meters.
- 3. Able to Determine miner losses in pipes.
Course Title : SURVEYING - II LAB
Course code: CE408ES
Program: S Y BTech ( Sem -II)
- 1. The students can Perform surveying on any civil engineering work.
Course Title : ENGINEERING GEOLOGY LAB
Course code: CV407ES
Program: S Y BTech ( Sem -II)
- 1.At the end of the course, the student will be able to identify the various rocks, minerals depending on geological classifications.
Course Title : ENVIRONMENTAL SCIENCE AND TECHNOLOGY
Course code: MC400ES
Program: S Y BTech ( Sem -II)
- 1. Based on this course, the Engineering graduate will understand /evaluate /develop technologies on the basis of ecological principles and environmental regulations which inturn helps in sustainable development.
Course Title : CONCRETE TECHNOLOGY
Course code: CE501PC
Program: T Y BTech ( Sem -I)
- 1. Ability to Identify Quality Control tests on concrete making materials.
- 2. Ability to Understand the behavior of fresh and hardened concrete.
- 3. Ability to Design concrete mixes as per IS and ACI codes.
- 4. Ability to Understand the durability requirements of concrete.
- 5. Ability to Understand the need for special concretes.
Course Title : DESIGN OF REINFORCED CONCRETE STRUCTURES
Course code: CE502PC
Program: T Y BTech ( Sem -I)
- 1. Students will be able to Design RC Structural elements.
- 2. Students will be able to Design the Reinforced Concrete beams using limit state Design.
- 3. Students will be able to Design Reinforced Concrete slabs.
- 4. Students will be able to Design the Reinforced Concrete Columns and footings.
- 5. Students will be able to Design structures for serviceability.
- 6. Students will be able to Design staircases, canopy.
Course Title : WATER RESOURCES ENGINEERING
Course code: CE503PC
Program: T Y BTech ( Sem -I)
- 1. Able to Analyze hydro-meteorological data
- 2. Able to Estimate abstractions from precipitation
- 3. Able to Compute yield from surface and subsurface basin
- 4. Able to Develop rainfall-runoff models
- 5. Able to Formulate and solve hydrologic flood routing models
- 6. Able to Estimate runoff, design discharge from catchment
Course Title : FUNDAMENTALS OF MANAGEMENT
Course code: SM504MS
Program: T Y BTech ( Sem -I)
- 1. The students understand the significance of Management in their Profession. The various Management Functions like Planning, Organizing, Staffing, Leading, Motivation and Control aspects are learnt in this course. The students can explore the Management Practices in their domain area.
Course Title : OPERATING SYSTEMS
Course code: CS511OE
Program: T Y BTech ( Sem -I)
- 1. Apply optimization techniques for the improvement of system performance.
- 2. Ability to design and solve synchronization problems.
- 3. Learn about minimization of turnaround time, waiting time and response time and also maximization of throughput by keeping CPU as busy as possible.
- 4. Ability to change access controls to protect files.
- 5. Ability to compare the different operating systems.
Course Title : CONCRETE TECHNOLOGY LAB
Course code: CE505PC
Program: T Y BTech ( Sem -I)
- 1. At the end of the course, the student will be able to understand properties of concrete material, behavior of concrete & properties of fresh & hardened concrete.
Course Title : GEOGRAPHICAL INFORMATION SYSTEMS LAB
Course code: CE506PC
Program: T Y BTech ( Sem -I)
- 1. At the end of the course, the student is exposed to spatial technologies, mapping the field problems and solution convergence through GIS.
Course Title : HYDRAULICS AND HYDRAULIC MACHINERY LAB
Course code: CE507PC
Program: T Y BTech ( Sem -I)
- 1. Ability to Compute drag coefficients
- 2. Ability to Test the performance of pumps and turbines
- 3. Ability to Determine Manning’s and Chezy’s coefficients for smooth and rough channels
- 4. Ability to Determine Energy loss in Hydraulic jump and Calibrate standing wave flume
Course Title : PROFESSIONAL ETHICS
Course code: MC500HS
Program: T Y BTech ( Sem -I)
- 1. The students will understand the importance of Values and Ethics in their personal lives and professional careers. The students will learn the rights and responsibilities as an employee, team member and a global citizen.
Course Title : DESIGN OF STEEL STRUCTURES
Course code: CE601PC
Program: T Y BTech ( Sem -II)
- 1.Ability to Design tension and compression members
- 2.Ability to Design beams and beam columns.
- 3.Ability to Design bolt and weld connections.
- 4.Ability to Design built up members and Column base
- 5.Ability to Design of plate girders and Roof Trusses
Course Title : ENVIRONMENTAL ENGINEERING
Course code: CE602PC
Program: T Y BTech ( Sem -I)
- 1.The students will be able to Analyze characteristics of water and wastewater
- 2.The students will be able to Estimate the quantity of drinking water and domestic wastewater generated
- 3.The students will be able to Design components of water supply systems Design sewerage system
Course Title : SOIL MECHANICS
Course code: CE603PC
Program: T Y BTech ( Sem -II)
- 1.Ability to Understand the mechanism Behaviour of Soil for different loads.
- 2.Ability to determine properties of soil from soil condition.
Course Title : AIR POLLUTION AND CONTROL
Course code: CE611PE
Program: T Y BTech ( Sem -II)
- 1. Able to Identify sampling and analysis techniques for air quality assessment
- 2. Able to Describe the plume behavior for atmospheric stability conditions
- 3. Able to Able to control air pollution by properties various techniques to control
Course Title : ADVANCED STRUCTURAL ANALYSIS
Course code: CE612PE
Program: T Y BTech ( Sem -II)
- 1. Students will be able to Demonstrate the concepts of qualitative influence line diagram for continuous beams and frames
- 2. Students will be able to Apply the methods of indeterminate truss analysis
- 3. Students will be able to Demonstrate the behavior of arches and their methods of analysis analyze cable suspension bridges
- 3. Students will be able to Analyze multistory frames subjected to gravity loads and lateral loads
Course Title : GROUND WATER DEVELOPMENT AND MANAGEMENT
Course code: CE613PE
Program: T Y BTech ( Sem -II)
- 1.At the end of the course, the student will be able to Understand Ground Water occurrence, Ground Water Movement Well constructional etc..
Course Title : EARTH AND ROCKFILL DAMS AND SLOPE STABILITY
Course code: CE614PE
Program: T Y BTech ( Sem -II)
- 1.Able to Describe the behaviour of natural and engineered soil / rock slopes under various weather and engineering conditions.
- 2.Able to Explain the factors that may affect the stability of slopes.
- 3.Able to Select an appropriate slope stability analysis method subject to geometry of slope, material properties, and uncertainty of observations.
- 4.Able to Assess the potential landslide risk of slopes.
Course Title : SOIL MECHANICS LAB
Course code: CE604PC
Program: T Y BTech ( Sem -II)
- 1. At the end of the course, the student will be able to Classify and evaluate the behavior of the soils subjected to various loads.
Course Title : COMPUTER AIDED DRAFTING – II LAB
Course code: CE605PC
Program: T Y BTech ( Sem -II)
- 1. At the end of the course, the student will be able to draft various structures.
Course Title : ADVANCED ENGLISH COMMUNICATION SKILLS (AECS) LAB
Course code: EN606HS
Program: T Y BTech ( Sem -II)
- 1. Able to Acquire vocabulary and use it contextually
- 2. Able to Listen and speak effectively
- 3. Able to Develop proficiency in academic reading and writing
- 4. Able to Increase possibilities of job prospects
- 5. Able to Communicate confidently in formal and informal contexts
Course Title : REMOTE SENSING & GIS
Course code: A70140
Program: FTH Y BTech ( Sem -I)
- 1. Ability to Select and analyze the type of photogrammetry technique for required purpose.
- 2. Ability to Describe the process of data attainment of satellite images and their characteristics.
- 3. Ability to Explain the concepts and fundamentals of GIS and analyze the basic components of GIS.
- 4. Able to Identify the earth surface features from satellite images.
- 5. Be able to Make out the difference between vector data model and raster data model and models conversion process.
Course Title : TRANSPORTATION ENGINEERING-II
Course code: A70143
Program: FTH Y BTech ( Sem -I)
- 1. Ability to Identify various components of Permanent Way in Railway Engineering.
- 2. Ability to Calculate various values required for geometric design of Railway Track.
- 3. Ability to Identify various components required for design of Airports, Ports and Harbors.
- 4. Ability to Understand various applications and user services of Intelligent Transportation Systems.
Course Title : ESTIMATING AND COSTING
Course code: A70138
Program: FTH Y BTech ( Sem -I)
- 1. The student will have knowledge on various methods of valuations, different methods for estimating and cost depreciations.
- 2. The student will be able to estimate labour required stage wise and wood work.
- 3. The student will have complete knowledge on various types of contracts and tenders.
Course Title : WATER RESOURCES ENGINEERING-II
Course code: A70133
Program: FTH Y BTech ( Sem -I)
- 1. Able to Identify various types of reservoir and their design aspects.
- 2. Able to Design gravity dam.
- 3. Able to Identify various types of spillways and their design aspects.
- 4. Able to Design head and cross regulator structures.
- 5. Able to Establishes the understanding of cross drainage works and its design.
Course Title : AIR POLLUTION AND CONTROL
Course code: A70136
Program: FTH Y BTech ( Sem -I)
- 1. Ability to Analyze different types and sources of air pollution.
- 2. Ability to Analyze the properties of atmosphere on air quality.
- 3. Ability to Analyze different types of particulate control devices.
- 4. Ability to Apply various methods to control NOx and SOx emissions.
- 4. Ability to Apply various methods to analyze ambient air quality standards.
Course Title : INDUSTRIAL WASTE WATER TREATMENT
Course code: A70139
Program: FTH Y BTech ( Sem -I)
- 1. Able to Distinguish between the quality of domestic and industrial water requirements and Wastewater quantity generation.
- 2. Able to Understand the industrial process, water utilization and waste water reduction.
- 3. Able to Impart knowledge on selection of treatment methods for industrial wastewater.
- 4. Able to Acquire the knowledge on operational problems of common effluent treatment plants.
- 5. Able to Gain knowledge on different techniques and approaches for minimizing the generation and application of Physic chemical and biological treatment methods for recovery, reuse and disposal of industrial wastewater.
Course Title : CONCRETE AND HIGHWAY MATERIALS LAB
Course code: A70195
Program: FTH Y BTech ( Sem -I)
- 1. Able to Performed various tests on cement, aggregates and concrete.
- 2. Able to perform various tests on bitumen.
- 2. Able to Judge the soil, road aggregate and their suitability in pavement construction.
- 2. Able to design the mix proportions of the Bituminous mixes.
Course Title : ENVIRONMENTAL ENGINEERING LAB
Course code: A70192
Program: FTH Y BTech ( Sem -I)
- 1. Students expose to the standards of drinking water in terms of Quality.
- 2. They know the significances of various drinking quality parameters and their application at various levels of water supply works and sewage treatment process.
- 3. They perform the Experiments to find the various parameters of drinking water.
Course Title : REHABILITATION AND RETROFITTING OF STRUCTURES
Course code: A80151
Program: FTH Y BTech ( Sem -II)
- 1. Should be able to Identify the causes of deterioration in structures and suggest suitable remedial measures.
- 2. Should be able to Infer the causes and prevention mechanisms of corrosion in steel reinforcement and fire induced damages.
- 3. Should be able to Learn to inspect and assess the structures using techniques of visual inspection and NDT.
- 4. Should be able to Evaluate a structural damage and recommend suitable repair and strengthening methods.
- 5. Should be able to Identify the latest health monitoring and building instrumentation methods.
Course Title : PRESTRESSED CONCRETE STRUCTURES
Course code: A80150
Program: FTH Y BTech ( Sem -II)
- 1. Ability to Understand various principles and methods of pre-stressing.
- 2. Ability to Calculate Losses of Prestress in Pre tensioning and Post Tensioning methods.
- 3. Ability to Analyze and Design Prestressed concrete beams for Flexure, Shear and Deflections.
- 4. Ability to Determine transmission length and anchorage zone stresses in Prestressed concrete members.
Course Title : CONSTRUCTION MANAGEMENT
Course code: A80146
Program: FTH Y BTech ( Sem -II)
- 1. Ability to Apply the knowledge of mathematics, science and engineering principles in construction projects.
- 2. Able to Understanding the basic concepts and skills required for construction management.
- 3. Able to Plan and schedule a civil engineering project by using techniques like CPM, PERT.
- 4. Ability to Infer the key issues for building contract procedures, management and administration.
- 5. Able to Analyze the different quality and safety issues involved in construction projects.
Course Title : SEMINAR
Course code: A80089
Program: FTH Y BTech ( Sem -II)
- 1. Be exposed to research in various fields of Civil Engineering
- 2. Learnt professional development skills such as preparing publications, reviewing research articles, performing literature review, etc.
- 3. The ability to analyze world issues from historical and contemporary perspectives from multiple disciplines of Civil Engineering.
Course Title : PROJECT WORK
Course code: A80088
Program: FTH Y BTech ( Sem -II)
- 1. The graduate will be able to Exhibit good teamwork skills and serve as effective members of multi-disciplinary project teams.
- 2. The graduate will be able to Articulate and justify technical solutions to diverse audiences through oral, written, and graphical communication.
- 3. The graduate will be able to Enable understand the importance of professional and ethical responsibilities of civil engineers, and be aware of codes of conduct and other sources of guidance for professionally ethical decision making.
Course Title : COMPREHENSIVE VIVA
Course code: A80090
Program: FTH Y BTech ( Sem -II)
- 1. The viva voce will enable communication between the examiner and student and provide invaluable experience for career interviews.
- 1. Students gain thorough knowledge of Civil engineering.